Lava-computer SP-PCI Manual de usuario descargar pdf (Pagina 4)

Connecting a non-printer device

(e.g. external drive or parallel scanner)

to the SP-PCI's parallel port

In Windows 95/98/ME (not Windows 2000/XP) some parallel port

devices require parallel ports that use standard (legacy) ISA LPT

addresses (0278h or 0378h). Because the SP-PCI card is a fully compliant

PCI device,its default address (Input/Output Range) is beyond the

standard range of ISA I/O addresses.In order to connect such a

peripheral to the SP-PCI card, the I/O address range of the card must

therefore be changed manually.This section describes how this is done.

1. Open Control Panel|System|Device Manager and find the SP BIDIR

Parallel-PCI listing under Ports. Click Properties, and proceed to the

Resources tab.The following screen will appear (Note: the

Input/Output Range and Interrupt of your particular configuration

may differ from the one below).

1 2 3 4 5 6 7 8

Sin comentarios

Lava-computer SP-PCI Manual de usuario Pagina 4